[Fix] Linksys Extender Not Connecting to Internet Issue

When it comes to enjoy blazing-fast internet all over the house, streaming movies, playing online games, and do online shopping; there is no thriving competition to Linksys WiFi extender, is it? However, like any other WiFi device, Linksys extenders are also victim of technical issues, even after a successful Linksys extender setup.

Among all, Linksys extender not connecting to internet is the most seen issue. Besides, this issue has been reported by a thousand users daily. If you are also sailing on the same boat, we have a rescue plan for you. In this article, you will surely find a fix for the issue you are currently getting. Let’s get started!

How to Fix Linksys Extender Not Connecting Issue?

Ranging right from faulty wired or wireless connections to improper Linksys extender setup, there could be a vast number of reasons behind getting the issue. But, before you start with the troubleshooting process, first check with your ISP and confirm the problem is not from his end.

Just in case, the service provider of your internet connection give you his words that everything is fine, then proceed further and troubleshoot the issue on your own by using the hacks provided below.

1. Power Cycle the Linksys Extender

The power cycling process works in a number of cases. So, without thinking much, simply power cycle your Linksys device by following the guidelines highlighted below:

Unplug your Linksys WiFi extender.
After waiting for a short span of time, plug in your device back to its wall socket.
Turn it on and see if the issue you are facing with your device is fixed or not.

2. Opt for an Ethernet Source

If you have connected your Linksys extender and router using a wireless source, facing connectivity issues is quite common. In such a case, we suggest you opt for Ethernet source for connecting them. Also, ensure to make use of an Ethernet cable that is well working and you have connected the cable into the correct ports of your extender and router.

By any chance, if you have established the Ethernet connection already between your devices, but still can’t access the internet, it seems like there are some issues with the Ethernet connection.

To get it fixed, check if the Ethernet cable is firmly installed into your devices. On the other hand, if you find even a small cut in the cable, replace it right away with a new one. Sometimes, even a small cut or defect in the cable and lead to the Linksys extender not connecting to internet issue.

3. Update Linksys Extender Firmware

Use of an outdated firmware on your device can also result in the internet connectivity issue. To get the issue fixed on the fly, update the Linksys extender’s firmware to the latest version. Now, you might be wondering that if there is no internet, then how you can update the firmware update, well, by connecting the PC to a hotspot of your mobile.

To avoid firmware update failed issue, you can sit back and relax and let the firmware update process completes itself. In simple words, we do not suggest you lose your patience and interrupt the firmware update process by disconnecting the extender from your router, turning it off, clicking on back button, or refreshing the web page.

4. Reconfigure Linksys Extender

If even after updating the Linksys extender’s firmware, you are still unable to make the most out of your internet connection, then chances are you have not configured your device in a proper way. Hence, for fixing the improper Linksys extender setup issue, try to reset your device first and then take the plunge to configure it again.

Thus, to reset the extender, all you have to do, press and hold the reset hole on it, and release it after a couple of minutes. Now that your extender is reset successfully, access its user manual and set up the device with ease. There you will also find information regarding how to execute the Linksys Velop setup process.