Can’t Access Complete Troubleshooting Guide

Can’t Access Complete Troubleshooting Guide

No matter whether you are about to perform Wavlink setup in your house or want to update its firmware, you need to log in to it via Having said that, accessing (the default web address of the Wavlink extender) is one of the important steps toward managing the Wavlink extender’s settings. But, what if you are unable to access the Wavlink extender’s web address? In such a case, we suggest you to apply the troubleshooting hacks jotted down in this write-up. Continue reading!

Reasons: Can’t Access

Before taking a walk through the troubleshooting hacks outlined underneath, have a quick nudge at the reasons causing the issue:

  • You haven’t used the correct web address, to log in to your Wavlink WiFi extender and access its settings
  • The web address has been inserted into the web browser’s search bar.
  • Browsing history is not cleared
  • Making use of the private window can also prevent you from accessing the web browser
  • Distance between your Wavlink extender and host router has exceeded the actual limit
  • The web browser you are using is outdated
  • Your internet service provider could also be at the fault

That’s it! These were some common reasons behind getting the “can’t access” issue. Anticipating that you are well aware of them! Now, it’s time to reveal the troubleshooting hacks! You can take help from the hacks to get the issue fixed at hand.

Fixed: Can’t Access

Given below are some of the topmost hacks that will surely help you do away with the issue you are facing in the blink of an eye:

Fix 1: Use the correct web address to access the Wavlink login window. Cross-check the web address entrée before hitting the Enter key on your desktop or laptop.

Fix 2: Do not use the browser’s search bar to access the web address. Instead, use the browser’s URL bar. On the other hand, if you avoid using the private window, then also you will get success to overcome the issue.

Fix 3: Help your Wavlink WiFi range extender to fight against technical glitches by rebooting or power cycling it. Therefore, unplug your Wavlink device and re-plug it after a couple of minutes.

Fix 4: If the “can’t access” issue persists even after rebooting the Wavlink WiFi extender, then you are advised to reduce the distance between your devices (host router and Wavlink extender).

If the issue is not ready to leave your back, then try some more hacks provided in the next section. By implementing the rest of the hacks, you will surely get success. So, have patience!

Need More Help?

Fix 5: Have a look at the Ethernet cable connecting your router and the Wavlink extender. If it is worn out, then get ready to replace it with a new one.

Fix 6: Delete unnecessary files like cache and cookies from your browsing history. Doing so will prevent you from getting the issue again and again and also help you get Wavlink login success via web address.

Fix 7: Keep coordinating with your ISP to ensure that some kind of maintenance is being performed by his side on a regular basis. Doing so will help you keep internet-related issues at bay that may stop you from accessing

Fix 8: Last, but not least, check if the web browser you are using is running on an up-to-date version. In case it is not, then we advise you to install the latest software on the web browser as soon as possible.

Now, try to access the wifi wavlink com ap setup page to see if the issue is resolved for you or not.

In a Nutshell

These were the fixes that will help to resolve the “can’t access” issue. By any chance, if the web address is still not working for you, then try to do Wavlink login using the default IP address of your Wavlink extender. It works similar as the web address.

Now, we are going to end this write-up. Anticipating that the troubleshooting hacks (fixes) provided here were helpful.