5 Tips To Setup Wavlink WiFi Extender And Access The Login

5 Tips To Setup Wavlink WiFi Extender And Access The Login

Blogger

Do you want to set up the Wavlink WiFi extender? If yes, then you need to follow the set up steps. In this process, the following guide will help you.

Setup Your Wavlink Wireless Extender Via Manually

Simple method to setup WiFi extender, follow these following steps:

  1. Firstly, you should connect your Wavlink WiFi extender close to the router.
  2. Secondly, When your WiFi extender glows solid LED light, then you can connect your device like computer, laptop and tablet etc.
  3. After that, you may go to the menu settings of your connected device.
  4. Now, pick an option for WiFi or wireless settings.
  5. Under the list of available WiFi networks, you will find the Wavlink extender _Ext network.
  6. Open a web browser such as firefox and safari etc. and click on the address bar.
  7. Enter AP setup. A new page of WiFi range extender setup will display on screen.
  8. Join or install the Wavlink WiFi extender setup by the following setup instructions of AP extender.

Setup Your Wavlink WiFi Extender By WPS

You can use the WPS button to set up the WiFi extender with the router. For this situation follow these instructions:

  1. Move your extender close to the router and then connect it.
  2. Now, you can turn on your Wavlink WiFi extender.
  3. Allow the light of the power LED to turn on green.
  4. Once you have done this process, then press the WPS button of your WiFi extender.
  5. After that, press the WPS button on your router.
  6. Now, your extender and router shows a green light, which is blinking.
  7. Sync your WiFi router with the home network and leave your device for two minutes. After this, your setup process will complete.
  8. Lastly, login to the AP. setup page and complete the installation process.

AP Configuration Process for Wavlink WiFi Network

If you want to configure your AP setup steps, then follow these:

  1. Locate your Wavlink extender close to the power socket.
  2. Plug your device into the correct power source.
  3. Just hold down the power button on your extender and wait till the light of the extender is solid green.
  4. For the extender setup you should link your laptop or computer to the AP setup_Ext network.
  5. Click on the address bar and type Ap.setup. Then you will go to the Wavlink extender page.
  6. Open an account for AP login.
  7. After that, follow only the instructions which are shown on the screen on a WiFi enabled device.

How To Login Web Management Page

If you want to change any setting of your extender, then you need to login the Wavlink web Management Page. Also check the process through ap.setup

Here are some tips, which you can use very easily:

  1. Attach your Wavlink extender to your laptop or computer. You can also use an ethernet cable or link your device without wires.
  2. Now, go to the web browser.
  3. After that, enter the wifi.wavlink.com.
  4. Permits the extender login window to appear.
  5. Enter all applicable information perfectly.
  6. Lastly, click on the login.

Setup Your Extender By Default IP Address

To set up your Wavlink WiFi extender, you can use the default IP address.

Here are the some steps, which you can use very simply:

  1. For your Wavlink extender network you should establish a wireless connection.
  2. Now, open the browser on your device.
  3. Go to the URL bar and enter the IP 192.168.10.1.
  4. After that follow the instructions, which are given on the screen.

Note:

If the extender’s connection is not stable after the setup, check the firmware of your device. You need to update the firmware from time to time. Below the steps are helpful for your process:

  1. First, you need to go to the official website of Wavlink WiFi extender.
  2. Now, download and update the new software version, which is available for Wavlink extender.
  3. Save your downloaded firmware file in the computer or laptop.
  4. For your WiFi device go to the web interface.
  5. Click on the folder of updated firmware, to upload.
  6. Permits your router to carry out new changes.
  7. To check updates both router and modem may reboot.
  8. Once you do all the steps, it means your Wavlink WiFi extender’s  firmware is successfully updated.        

Final Words

In this article, you get the knowledge about the setup method of your Wavlink WiFi extender and also get the knowledge of login access. We hope it will help you to sort out your issues. In the other case, if you are still facing any problem then you can drop a message in our comment box. We will give you a reply soon.

technology