In this article, we will provide you instructions to fix Netgear extender WiFi coverage issue on the fly. So, don’t worry at all! We assure you that by the end of this article, you will surely get a fix to troubleshoot Netgear extender WiFi coverage issue in hand.
Let’s dive in!
Fix 1: Power Cycle Your Netgear Extender WiFi Coverage
The very first fix that you have to try to troubleshoot Netgear extender WiFi coverage is to power cycle it once. A simple restart is sometimes enough to fix big issues related to your extender. So, without ado, scroll down a little and get to know the steps to power cycle your Netgear extender.
Step1: First off all, you have to disconnect all the devices that are connected to Netgear_Ext SSID.
Step2: Once you are done, unplug your Netgear WiFi extender.
Step3: After some time, turn on your device (the extender).
Step4: Access the Netgear_Ext SSID again.
After power cycling, can we hope that Netgear extender WiFi coverage issue has been fixed? To verify the same, access mywifiext.net login page! Are you able to load it? If not, then it means that you are still getting the same issue. Don’t sweat over it! There are couple of more fixes waiting for you. Try them to get the most out of your Netgear extender WiFi coverage.
Fix 2: Update for better Netgear Extender WiFi Coverage
An outdated firmware version on your device (extender) will also let you experience Netgear extender WiFi coverage issue. Don’t worry! This type of issue can be fixed easily. Navigate to the Netgear’s official site and download the correct Netgear extender’s firmware version as per the model you have.
On the off chance if you have already downloaded the firmware on your device and you are still getting Netgear extender WiFi coverage issue, then it means:
- A wrong version of firmware has been downloaded
- Netgear extender firmware update process was interrupted
- Your device firmware version doesn’t needs to be upgraded
So, in that case, we suggest you to reset your Netgear extender back to factory default values, reconfigure it, and then update the firmware accordingly.
Note: If the WiFi coverage issue continues to persist, then also the reset process will be your last resort.
Fix 3: Reset Netgear Extender
Step1: Disconnect all the devices that were accessing Netgear_Ext SSID.
Step2: Press the extender’s reset hole.
Step3: Hold and release it (the reset hole).
Your extender got reset! Now, take the plunge to reconfigure it.
Fix 4: Setup Netgear Extender
Step1: Get access to Netgear_Ext SSID again.
Step2: Connect your existing router and the Netgear extender using an Ethernet source. You can also connect them in a wireless manner as well.
Step3: Turn on a windows computer or laptop and launch a web browser.
Step4: Enter mywifiext.net or 192.168.1.250 IP in the address bar.
Note: If you are using iOS, iPad, or Apple device for Netgear extender setup, then use mywifiext.local.
Step5: Mywifiext.net login page will appear.
Step6: Reaching here, enter the default login details of your range extender and follow the on-screen instructions for extender configuration.
In blink of an eye you Netgear extender will be configured shortly.
Fix5: Now, the time has come where you can improve the WiFi coverage. Yes, to update extender’s firmware! So, what you have to do – access Netgear_Ext SSID, navigate to the device’s official site, follow the instruction to update extender’s firmware.
Important Points
- Don’t forget to provide your extender’s model number. Netgear extender firmware instructions vary upon model to model.
- Check whether your extender’s firmware needs to be upgraded or not.
- Ensure that you have an active internet connection to perform the process.
Note: A discontinuous, no, or slow internet connection can also be one of the major reasons behind Netgear extender Wireless range coverage issue. So, for this, contact your ISP right away and ask him to improve your internet speed by providing you the best data plan.
To Conclude
Our article comes to an end! As we promised that by the end of this post, you will surely have a fix in hand to troubleshoot “Netgear extender WiFi coverage” issue. So, is the issue fixed, isn’t it? Please share your feedback!