Innumerable users have been opting for Netgear wireless range extenders so that they can take care of their internet-related needs. However, despite achieving Netgear extender setup success via mywifiext in their homes, they have been experiencing the Netgear extender not working issue.
What caused this issue? How can it be resolved? We have answered both of these questions in detail in this article. With that said, get down to reading this instant.
Why is Netgear Extender Not Working?
There can be several reasons why your Netgear wireless range extender is refusing to work. However, we have talked about the most common ones in this section.
- Signal interference
- Interrupted power supply
- Unstable cable connection
Now you can go through the troubleshooting hacks mentioned in the following section and gain an understanding of how to make your device up and running in a flash.
[Fixed] Netgear Extender Not Working Issue
1.Move the Netgear Extender
As mentioned above, signal interference is one of the topmost factors that might have contributed to the Netgear extender not working issue. Chances are you are also facing the issue at hand because the signals emitted from your wireless range extender are getting interfered with. This might be because it is placed near cordless phones, mirrors, baby monitors, fish tanks, microwave ovens, refrigerators, treadmills, washing machines, and televisions. To take care of the problem, it is recommended that you change the location of your networking device without wasting any more time.
Apart from keeping it away from the aforementioned examples, do not place it near thick concrete walls or in corners. Otherwise, the signals coming out of your extender will not get interfered with, but completely blocked.
2. Provide a Proper Power Supply
Considering you are walking through this troubleshooting hack, it means that you are still experiencing the Netgear extender not working issue. It might be because your networking device is not getting an uninterrupted and adequate power supply from its wall socket. Are you aware of why this might be happening? Well, because the electrical socket is damaged. Thus, you need to get your existing wall outlet repaired. Although this will work for you, on the off chance, it refuses to, then take our advice, and connect your wireless range extender to another wall socket for better results.
For your information, if you are using one of the old Netgear extender models, then it might have come with a power cord. Make sure that it is not worn out.
3. Use a New Ethernet Cable
Have a look at the Ethernet cable that you used to connect the Netgear wireless range extender to the host router. Do you see any cuts on or in it? Nodding your head in yes? Well then, you just came face to face with yet another reason why your networking device is clearly refusing to work. The solution here is pretty simple, i.e. change the Ethernet cable with a brand new one. See to it that the newly established connection is finger-tight. Keeping the connection loose will only make you become a victim of more technical issues in the future. And we are guessing that you do not want that.
In case, this hack does not work for you, then you are left with no other option than to connect the networking devices wirelessly.
Still Stuck?
We were hoping that you do not come to this section, but considering you are here, then the reason is quite obvious, i.e. you are still not able to make your device run. Have you considered the possibility that there is something wrong with the device itself and there are no external reasons stopping it from working? No? You ought to do so now.
To troubleshoot the issue, consider resetting your wireless range extender to its default factory mode. Right after you are done doing so, access the 192.168.1.250 IP address and set up your networking extender from scratch. If you do not feel comfortable using the manual method for the setup process, then make use of the Nighthawk application.
Sum Up
With the last hack, we are putting an end to our guide written on how you can resolve the Netgear extender not working issue. We are sure that at least one of the hacks given above helped you to get rid of the issue that you were facing.
In case you are interested in sharing which hack helped you out with your fellow readers, then waste no more time doing so by using the comment section.