Netgear Orbi Password Not Working Issue? Let’s Fix This!

Netgear Orbi Password Not Working Issue? Let’s Fix This!

Netgear Orbi is one of the most preferred WiFi devices in today’s digital world. After setting it up and performing Netgear Orbi firmware update, a user need not to worry about slow and sluggish internet range or blind spots in home. And, for Orbi setup and to perform Netgear Orbi firmware update, user needs to log in to it. And, logging into Netgear Orbi is not possible without orbilogin password. But, it becomes a headache when orbilogin do not work, isn’t it? If you are also annoyed by the same issue, give a read to this piece of writing and learn how to fix “Netgear Orbi password not working” issue in a matter of minutes. So, without much delay, let’s start over, shall we?

Solved: Netgear Orbi Password Not Working

Restart Your Netgear Orbi

Restarting Netgear Orbi might look a simple fix to you. But, you have to trust us! Restarting or power cycling Netgear Orbi is one of the easiest hacks to resolve a number of issues related to the device (Orbi). Before you doubt this fix, let us make you familiar with the fact that it will surely help your Netgear Orbi to get rid of major technical glitches in a jiffy. And, who knows it will resolve “Netgear Orbi password not working” issue for you as well.

To know the correct method or restarting or power cycling your Netgear Orbi, follow the instructions outlined below:

Step 1: Disconnect all the WiFi devices connected to your Netgear Orbi, even modem.

Step 2: Once done, turn off the Netgear Orbi.

Step 3: Unplug the Orbi device from the wall outlet as well.

Step 4: Wait for some time.

Step 5: Re-plug the Orbi.

Step 6: Power on the Netgear device.

Step 7: Reconnect all your devices to your Orbi’s WiFi.

After restarting your Netgear Orbi, check whether orbilogin password starts working or not.

Still no luck? Read the next fix highlighted below!

Check Your Internet Connection

Another reason that is forcing you to experience “Netgear Orbi password not working” issue is the slow or poor internet connection. Slow internet connection can persists due to the following reasons:

  • Improper connection between your Netgear Orbi and client devices
  • Issues from your ISP end
  • Distance between your Netgear Orbi and modem is too much
  • Your Netgear Orbi is placed on a lower or congested surface

In that case, ensure to:

  • Make a proper and secure connection between your devices
  • Contact your ISP and ask him to fix the slow internet connection issue for you as soon as possible
  • Lessen the distance between your Netgear Orbi, modem, and client devices
  • Place your Netgear Orbi openly on a higher and center-most area in your home

Important Points

  • If you have used an Ethernet cable to connect your devices, ensure that it is properly established and the cable you are using is non-damaged.
  • You can also make a wireless connection between your Netgear Orbi and the client devices. Just ensure to get connected to correct network.

Check the Password

A number of users make typos while entering the orbilogin password. Make sure that you are not sailing on the same boat. Moreover, we want to make you aware with the fact that orbilogin password is case-sensitive. Therefore, be very careful while entering the orbilogin login details.

Also, if you have changed the orbilogin credentials after setting it up, we suggest you to use it to log in to your Netgear device.

Reset and Reconfigure Orbi

Argh! It seems like you are still getting “Netgear Orbi password not working” issue, aren’t you? No worries! The time has come that you opt for the reset process. Resetting Orbi will surely fix the issue for you! But, you have to perform the Orbi setup process again.

Apart from this, all the settings made by your side on your Netgear Orbi will be erased automatically by simply press of a button. So, without much ado, locate the reset button on your Orbi, press it, hold it for some time, and release it.

Now, you can reconfigure it, perform Netgear Orbi firmware update process again, and tweak its settings.

To Conclude

And, with this last fix, our piece on writing on how to troubleshoot “Netgear Orbi password not working” issue ends here.

Hopefully, the fixes mentioned here proved helpful to you?