Linksys offers a wide range of WiFi extenders to its users and issues related to then are pretty common. Though some extender-related issues are very easy to fix, some can spin the head. But, you don’t have to worry at all. Because, we have got you covered! In this article, we will make you learn how to fix the most common extender-related issue i.e. can’t access the Linksys extender default IP.
There can be various reasons why you are not able to access the Linksys extender default IP. Let’s make you familiar with all such reasons so that you can easily cope up with the issue on your own.
Fix: Linksys Extender Default IP Not Working
Fix 1: Update the Internet Browser
While accessing the Linksys extender default IP, make sure that you are using an updated version of the internet browser.
Already using an up-to-date internet browser? Then, ensure to clear the browser cache and browsing history. Apart from this, make sure that the device software you are using to access the Linksys extender default IP address is up-to-date.
Are you done with the aforementioned fix? Now, try to access the Linksys router login page using the default IP and see if this tip worked for you or not.
Fix 2: Check the Wired Connection
Another most common reason behind Linksys extender default IP not working issue could be because of improper or unstable wired connection. Therefore, to do away the problem, make sure that the wired connection you have made between your Linksys extender and router is stable and accurate. Also, check the Ethernet cable you are using. It must be damaged and cuts-free.
Fix 3: Update the Firmware
Keep in mind that an outdated firmware version on your Linksys WiFi range extender may also stop you from accessing the IP address. In such a situation, we suggest you update the extender’s firmware and make the most out of it without any hassle.
Fix 4: Connect to Correct WiFi
Possibilities are that you are connected to an unknown WiFi (intentionally or unintentionally) to an unknown or free WiFi instead of your extender’s network. So, to access the Linksys extender IP address without any issue, ensure to get connected to your own WiFi only.
Fix 5: Verify the IP Address
Bear in mind – sometimes, typing errors in the Linksys extender default IP address can take you to third-party website instead of Linksys WiFi extender setup page. Therefore, ensure to type the Linksys extender IP address without typos only in the browser’s URL bar.
Still getting Linksys extender default IP not working issue? If so, then try power cycling or restarting your Linksys WiFi range extender once. The power cycle or the restart process can easily be initiated by following the instructions in exact given order listed below:
Step 1: First of all, disconnect all the devices (wired or wireless) that are currently connected to your extender’s WiFi.
Step 2: Once you’re done, turn the Linksys extender off by unplugging it from the wall outlet.
Step 3: Let your Linksys extender be cool. Give your device some rest.
Step 4: After sometime, turn on your Linksys extender by plugging it back into a working wall outlet that must be near to your existing router.
Step 5: Wait for the extender’s power LED to become stable.
Step 6: Now, connect your devices to the extender’s WiFi and try to connect the default IP address in anyone of them and see if the power cycling process helped you out in fixing the issue.
To Conclude
That’s it! Our list of troubleshooting tips on how to fix Linksys extender default IP not working issue ends here. Anticipating that you are now able to make the most out of your Linksys extender by accessing its default IP? Just in case, the issue is still being a troublemaker for you, immediately lay all your queries into the comments section.