How to Configure a Linksys Extender Using WPS Method?

How to Configure a Linksys Extender Using WPS Method?

Linksys is one of the most trusted brands for giving a wide range of routers and extenders to its users. Though there are many extender brands are in the race, Linksys is unbeatable. The device is very well-known for satisfying the needs of netizens. No matter which Linksys WiFi range extender model you have, configuring it is as much easy as counting 123. Here, in this piece of writing, we will throw some lights on the steps – how to configure a Linksys WiFi range extender using WPS method. Let’s get started, shall we?

Linksys Extender Setup Using WPS Method

Linksys WiFi range extender is a great device that helps in increasing the range and reach of your existing WiFi network to the fullest. Once you are done with Linksys extender setup, it will become easier for you to access the internet for any area in your home. However, to setup Linksys extender, it is important to follow the configuration steps in exact given order to make your device up and running in minutes.

Before you initiate the Linksys extender setup process, ensure that you have the following things handy:

  • An Ethernet cable that must be free from any kind of dust and cuts
  • A virus-free, load-free, and up-to-date PC or laptop
  • An up-to-date router that supports the WPS feature
  • Continuous and uninterrupted power supply
  • A stable internet connection

Once you have all the above-mentioned things handy, start following the steps outlined underneath to complete the Linksys extender setup process using the WPS method.

Step 1: Connect Your Linksys Extender and Router

The first step in our post is to connect your Linksys WiFi range extender and your router using an Ethernet cable. For this, you have to place your devices in reach of each other.After completing this process, check your WiFi connection by accessing your Linksys device extender.linksys.com web-based setup page.

Step 2: Power Up Your Devices

The next thing you need to do is to plugin your Linksys extender and router to a wall socket and provide them sufficient power supply. Bear in mind that the outlet you choose for plugging in your Linksys extender and router must be damaged-free and at the center-most area in your home. After completing the Linksys extender setup process, you can relocate your devices. But, the area for your devices must be ventilated and higher.

Step 3: Locate the WPS Button

Once you’re done with all the steps listed above, locate the WPS button on your Linksys extender and router. The location of the WPS button may differ from the device (extender and router) model you have.

Step 4: Configure Your Linksys Extender

As soon as you found the WPS button on your Linksys extender and router:

  • First things first, push the WPS button on your Linksys extender gently.
  • Wait for 2-3 minutes.
  • Then, push the WPS button on your main router.
  • The WPS LED on your devices will start blinking. This indicates that the Linksys extender setup process using the WPS method has been successfully completed.
  • Check the WPS connection between your devices by accessing the extender.linksys.com setup page.

That’s it! You have successfully completed the Linksys extender setup process using the WPS method. We suggest you to change its default settings, WiFi channel, and Linksys extender login password in order to prevent any unauthorized access after setting up your device using the WPS method.

Wrapping up, just in case, you can’t get the most out of your Linksys WiFi range extender even after setting it up properly using the WPS method, then feel free to drop all your issues and queries in the comments section.

technology